SL-TF-B
预订销售
无缝挤牙弯柄用螺母丝攻
作为螺母丝攻专用而开发出的挤牙丝攻.丝攻的底部带有侧面刃铣刀.可以在攻牙作业的时候切除内螺纹的内径部.从而使批量生产内径尺寸均一的母螺纹成为可能.(须预定).
Even if hole diameters are dispersed, minor diameters will be finished uniformly.
・ When the percentage of thread engagement of the hole
diameter is set at 95～105%, most of the internal thread seam can be eliminated.
Thread and internal diameter concentricity will improve and threads will show less deviation. ・ Thread and internal diameter concentricity will improve and threads will show less deviation.
・ Roughness of the internal thread flank surface and the finished
minor diameter surface will improve, and highly precise internal threads can be processed.
・ The minor diameter of the internal thread can be selected by designating the diameter of the side end mill.
・ When the percentage of thread engagement of the hole
diameter is set at 95～105%, most of the internal thread seam can be eliminated.
Thread and internal diameter concentricity will improve and threads will show less deviation. ・ Thread and internal diameter concentricity will improve and threads will show less deviation.
・ Roughness of the internal thread flank surface and the finished
minor diameter surface will improve, and highly precise internal threads can be processed.
・ The minor diameter of the internal thread can be selected by designating the diameter of the side end mill.
