100*80,200*40,200*80
长度测量仪
正弦规
一,用途与使用;
利用正弦原理,将正弦规的中心距作为弦长,精确计算出被测角度所对直角边的边长,并据此组合量块.当以该量块组的高度为一直角边,以所选正弦规的中心距为弦长组成一直角三角形时,该正弦规的工作面与另一直角边(通常为平板平面)所形成夹角的大小.即为被测角度的标准值,将被测角度反叠在正弦规的工作面上,用测微表检测形成被测角度的上表面与平板平面的平行度,即可求出被测角度的角度误差.
二,型号与规格;
编号 中心距 宽度 高度 毛重
1, 84260-001 100毫米 80毫米 40毫米 3.5公斤
2, 84260-002 200毫米 40毫米 55毫米 5公斤
3, 84260-003 200毫米 80毫米 55毫米 7公斤
Length measuring instrument
Sine Regulation
一, use and use;
Use sine principle, the sine regulation from the centre of a long string, accurate calculation of a measured perspective on the edge of the rectangular side, and, accordingly combination of blocks. When the volume to block the group has a high degree of angle for edge to the Sine the elections from the centre of a long string of right triangle, the sine of the face with another right-angled edge (usually flat plane) angle formed by the size of which is measured perspective of the standard value, will be Measuring point of overlap in the work of the sine surface, with micrometer table detection of a measured perspective on the flat surface and the parallel plane, can be obtained measured the angle of error of perspective.
二, the model and specifications;
No. Center Distance Width Height GW
1, 84260-001 100 mm 80 mm 40 mm 3.5 kg
2, 84260-002 200 mm 40 mm 55 mm 5 kg
3, 84260-003 200 mm 80 mm 55 mm 7kg
Sine Regulation
一, use and use;
Use sine principle, the sine regulation from the centre of a long string, accurate calculation of a measured perspective on the edge of the rectangular side, and, accordingly combination of blocks. When the volume to block the group has a high degree of angle for edge to the Sine the elections from the centre of a long string of right triangle, the sine of the face with another right-angled edge (usually flat plane) angle formed by the size of which is measured perspective of the standard value, will be Measuring point of overlap in the work of the sine surface, with micrometer table detection of a measured perspective on the flat surface and the parallel plane, can be obtained measured the angle of error of perspective.
二, the model and specifications;
No. Center Distance Width Height GW
1, 84260-001 100 mm 80 mm 40 mm 3.5 kg
2, 84260-002 200 mm 40 mm 55 mm 5 kg
3, 84260-003 200 mm 80 mm 55 mm 7kg
正弦规产品规格表如下：
