MF
M2-M10--F2-F3
倒角刀
使用方法是在攻牙返回时,进行均一美观的倒角.有两槽用和三槽用,在带直槽的丝攻以及带倒角刀槽的挤牙丝攻上也能使用.
1.开始攻牙时,弹簧被压缩,在这个工程中,倒角刀不起作用.
2.攻完牙时被压缩的弹簧向倒角刀施加压力.
3.丝攻在逆回旋转时进行倒角.
4.攻牙,倒角在同一个来回内完成.
倒角刀产品规格如下：
Bevel knives
Tapping use in return for uniform handsome bevel. Groove with two and three shafts used in the groove with straight wire with Chamfer knife attack and the trough of silk attack on the crowded teeth can be used.
1. Started tapping, spring is compressed in this project, bevel knife does not work.
2. Toothless attack at the end of the spring is compressed to exert pressure on the bevel knives.
3. Silk attack in the reverse rotation back when Chamfer.
4. Tapping, chamfering in the same round trip to complete.
Tapping use in return for uniform handsome bevel. Groove with two and three shafts used in the groove with straight wire with Chamfer knife attack and the trough of silk attack on the crowded teeth can be used.
1. Started tapping, spring is compressed in this project, bevel knife does not work.
2. Toothless attack at the end of the spring is compressed to exert pressure on the bevel knives.
3. Silk attack in the reverse rotation back when Chamfer.
4. Tapping, chamfering in the same round trip to complete.
